Duplex Gear Assembly Removal - Lexmark MS517dn Service Manual

Duplex gear assembly removal

1
Remove the left cover. See
2
Remove the rear door and cover. See
3
Remove the power supply. See
4
Remove the power supply shield. See
5
Remove the duplex. See
6
Position the printer so that it sits on its right side.
7
Remove the E‑clip (A).
8
Remove the screw (B).
9
Remove the screw (C).
10
Remove the three gears.
"Left cover removal" on page
"Rear door and cover removal" on page
"Power supply removal" on page
"Power supply shield removal" on page
"Duplex removal" on page
A B C
Parts removal
228.
289.
291.
239
4514-6xx
307.
290.