Specifying Memory Channels - Yaesu FTM-100DR Operating Manual

Searching for signals

Specifying memory channels

Specific memory channels to be scanned may be selected using the Setup menu "2
MEMORY SCAN TYPE" set to "2 SELECT MEMORY".
1
Press and hold
The MEMORY WRITE screen appears.
2
Press
3
Rotate the DIAL to select the desired memory
channel.
4
Press twice, (
side).
On the right side of the memory channel number
display li hts up. his indicates the
state. The memory channels marked with this
indicator are scanned when scanning only specified
channels.
Tips o unselect the memory channel press the button a ain.
o speci y other memory channels repeat steps
5
Press .
he pre ious screen returns and
channel number.
66
for over one second.
, ( appears on the left side).
appears on the upper
to .
is displayed on the le t side o the memory
turns o .