Changing Scan Settings - Fuji Xerox APEOSPORT-II C7500 User Manual

1
Press the <Job Status> button.
2
Select the job to cancel, and then
select [Stop]. You can select the
kind of jobs to be displayed from
[All Jobs], [All Printing Jobs], [All
Non-printing Jobs], and [Mailbox
Transfer Jobs].

Changing Scan Settings

You can change scan settings while scanning the document.
1
Select [Next Original].
2
Select [Change Settings...].
3
Set [Scanning Color], [Scan Resolution], [Original Size], [2 Sided Originals], [Original
Type], and [Lighten/Darken].
For each setting, refer to "Scanning Color (Selecting a Color Mode)" (P.142), "Scan Resolution
(Specifying a Scanning Resolution)" (P.155), "Original Size (Specifying an Scan Size)" (P.157), "2
Sided Originals (Scanning Both Sides of a Document)" (P.155), "Original Type (Selecting the
Document Type)" (P.144), and "Image Options (Adjusting Scan Density and Image Sharpness)"
(P.153).
4
Press the <Start> button.
Operations during Scanning
1 2 3
4 5 6
7 8 9
0 #
C
<Job Status>
button
4
127