Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
boot config
Description
The boot config command is used to configure the property of the system
configuration file.
Syntax
boot config filename filename { startup | backup | none } [ unitid ]
no boot config
Parameter
filename —— Specify the name of the configuration file to be configured. The
suffix ".cfg" is not included and the length is between 1 and 59 characters. By
default the startup configuration file is config1.cfg and the backup configuration
file is config2.cfg.
startup | backup | none —— Specify the property of configuration file. "startup"
represents the startup configuration file and "backup" represents the backup
configuration file, while "none" means to clear the property of the specified
configuration file.
unitid —— Specify the unit in the stack whose configuration file would be
configured. If not specified, configuration files of all the members in the stack will
be configured.
Command Mode
Global Configuration Mode
Example
Configure the config2.cfg as the startup configuration file in all the switches in
the stack:
T2700G-28TQ(config)# boot config filename config2 startup
copy backup-config tftp
Description
The copy backup-config tftp command is used to upload the backup
configuration file to TFTP server.
154
Advertisement
Table of Contents
