Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Parameter
index ——The index of the log host whose configuration will be displayed.
Display the configuration of all the log hosts by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of the log host 2:
T2700G-28TQ(config)#show logging loghost 2
show logging buffer
Description
The show logging buffer command is used to display the log information in the
log buffer according to the severity level in the specified unit or the whole stack.
Syntax
show logging buffer [ level level ] [ unit unit-id]
Parameter
level —— Severity level. There are 8 severity levels marked with values 0-7.
The information of levels with priority not lower than the select level will display.
Display all the log information in the log buffer by default.
unit —— Specify the unit whose log information in the log buffer will be
displayed. The log information in the log buffers of the whole stack will be
displayed by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the log information from level 0 to level 5 in the log buffer of unit 2:
T2700G-28TQ(config)#show logging buffer level 5 unit 2
124
Advertisement
Table of Contents
