T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Example
Display the configuration of 801.X globally:
T2700G-28TQ(config)#show dot1x global
show dot1x interface
Description
The show dot1x interface command is used to display all ports or the specified
port's configuration information of 801.X.
Syntax
show dot1x interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number. Display the
configuration of all the ports by default.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of 801.X for Gigabit Ethernet port 20:
T2700G-28TQ(config)#show dot1x interface gigabitEthernet 1/0/20
Display the configuration information of 801.X for all Ethernet ports:
T2700G-28TQ(config)#show dot1x interface
show radius accounting
Description
The show radius accounting command is used to display the configuration of
the accounting server.
Syntax
show radius accounting
116