Ip Igmp Require-Router-Alert; Ip Igmp Robustness - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Parameter
time —— Specify the max response time to the General Query message,
ranging from 1 to 25 seconds. The default value is 10 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the max response time to the General Query message as 5 seconds
on Interface VLAN 2:
T2700G-28TQ(config)# interface vlan 2
T2700G-28TQ(config-if)# ip igmp query-max-response-time 5

ip igmp require-router-alert

Description
The ip igmp require-router-alert command is used to configure to check the
router-alert option of the IGMP messages on specified interface. To disable this
check function on this interface, please use no ip igmp require-router-alert
command.
Syntax
ip igmp require-router-alert
no ip igmp require-router-alert
Command Mode
Interface Configuration Mode
Example
Check the router-alert option of the IGMP messages on Interface VLAN 2:
T2700G-28TQ(config)# interface vlan 2
T2700G-28TQ(config-if)# ip igmp require-router-alert

ip igmp robustness

Description
The ip igmp robustness used to configure the existing time of the non-querier
on specified interface. To restore to the default value on this interface, please
use no ip igmp robustness command.
316