Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the security configuration of Gigabit Ethernet port 1/0/20:
T2700G-28TQ(config)#show mac address-table max-mac-count interface
gigabitEthernet 1/0/20
show mac address-table interface
Description
The show mac address-table interface command is used to display the
address configuration of an Ethernet port.
Syntax
show mac address-table interface { fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port }
Parameter
port
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the address configuration of Gigabit Ethernet port 1/0/1:
T2700G-28TQ(config)#show mac address-table interface gigabitEthernet
1/0/1
show mac address-table count
Description
The show mac address-table count command is used to display the total
amount of MAC address table.
Syntax
show mac address-table count [ unit unit-id ] [ vlan vlan-id ]
——
The Fast/Gigabit/ten-Gigabit Ethernet port number.
138
Advertisement
Table of Contents
