Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Syntax
show interface counters [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number. By default, the
statistic information of all ports is displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistic information of all Ethernet ports:
T2700G-28TQ(config)#show interface counters
Display the statistic information of Gigabit Ethernet port 20:
T2700G-28TQ(config)#show interface counters gigabitEthernet 1/0/20
show interface configuration
Description
The show interface configuration command is used to display the
configurations of an Ethernet port, including Port-status, Flow Control,
Negotiation Mode and Port-description.
Syntax
show interface configuration [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port —— The Fast/Gigabit/Ten-Gigabit Ethernet port number or port list.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configurations of all Ethernet ports:
T2700G-28TQ(config)#show interface configuration
183
Advertisement
Table of Contents
