Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
copy image tftp-source
Description
The copy image tftp-source command is used to download the image file from
the TFTP server to the switch.
Syntax
copy image tftp-source [ device ]{ imagename } ip-address ip-addr filename
name
Parameter
device —— Specify the unit in the stack to which the image file downloaded, in
the format of unitid:, for example unit1:. If not specified, the image file will be
downloaded to all the members in the stack.
imagename —— Specify the name of the image file to be stored in the switch,
either image1.bin or image2.bin.
ip-addr —— IP address of the TFTP server.
name —— Specify the name of the image file which would be downloaded from
the TFTP server. The suffix ".bin" is not included.
Command Mode
Privileged EXEC Mode
Example
Download the image file named as image.bin to the unit 1 in the stack as its
image1.bin from TFTP server with the IP 192.168.0.148:
T2700G-28TQ#
192.168.0.148 filename image
copy image tftp-target
Description
The copy image tftp-target command is used to upload the image file from the
switch to the TFTP server.
copy
image
tftp-source
158
unit1:image1.bin
ip-address
Advertisement
Table of Contents
