T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Parameter
network number ——The network number of the network, in the format of
192.168.0.0.
Command Mode
Router Configuration Mode (router rip)
Example
Enable RIP function on interfaces of the network 192.168.0.0:
T2700G-28TQ(config)# router rip
T2700G-28TQ(config-router)# network 192.168.0.0
version
Description
The version command is used to specify the RIP version globally. By default,
the switch sends RIPv1 packets and receives both RIPv1 and RIPv2 packets. To
return to the default configuration, please use no version command.
Syntax
version { 1 | 2 }
no version
Parameter
1 —— Send and receive RIPv1 packets.
2 —— Send and receive RIPv2 packets.
Command Mode
Router Configuration Mode (router rip)
Example
Specify the RIP version as RIPv2:
T2700G-28TQ(config)# router rip
T2700G-28TQ(config-router)# version 2
354