TP-Link T2700G-28TQ Cli Reference Manual page 134

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Syntax
radius { [auth-pri ip] [auth-sec ip] [auth-port port] [acct-pri ip] [acct-sec ip]
[acct-port port] [auth-key { [ 0 ] password | 7 encrypted-password } ] [acct-key
{ [ 0 ] password | 7 encrypted-password] } }
no radius { auth-port | auth-key | auth-pri | auth-sec | acct-port | acct-key |
acct-pri | acct-sec }
Parameter
auth-pri ip —— The IP address of the authentication server.
auth-sec ip —— The IP address of the alternative authentication server.
auth-port port ——The UDP port of authentication server(s) ranging from 1 to
65535. The default value is 1812.
acct-pri ip —— The IP address of the accounting server.
acct-sec ip —— The IP address of the alternative accounting server.
acct-port port —— The UDP port of accounting server(s) ranging from 1 to
65535. The default value is 1813.
auth-key { [ 0 ] password | 7 encrypted-password } —— 0 and 7 are the
encryption type. 0 indicates that an unencrypted password will follow. 7
indicates that a symmetric encrypted password with a fixed length will follow. By
default, the encryption type is 0. "password" is the shared password for the
switch and the authentication servers to exchange messages which contains 31
characters at most. The question marks and spaces are not allowed.
"encrypted-password" is a symmetric encrypted password with a fixed length,
which you can copy from another switch's configuration file. The password or
encrypted-password you configured here will be displayed in the encrypted
form.
acct-key { [ 0 ] password | 7 encrypted-password } —— 0 and 7 are the
encryption type. 0 indicates that an unencrypted password will follow. 7
indicates that a symmetric encrypted password with a fixed length will follow. By
default, the encryption type is 0. "password" is the shared password for the
switch and the authentication servers to exchange messages which contains 31
characters at most. The question marks and spaces are not allowed.
"encrypted-password" is a symmetric encrypted password with a fixed length,
which you can copy from another switch's configuration file. The password or
encrypted-password you configured here will be displayed in the encrypted
form.
114