Access-List Policy Action - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
rules by configuring ACLs and actions together for effect. The operations here
include stream mirror, stream condition, QoS Remarking and redirect.
Syntax
access-list policy name name
no access-list policy name name
Parameter
name —— The Policy Name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Add a Policy named policy1:
T2700G-28TQ(config)#access-list policy name policy1

access-list policy action

Description
The access-list policy action command is used to add ACLs and create
actions for the policy. To set the detailed configuration of actions for a policy,
please use access-list policy action command to access Action Configuration
Mode. To delete the corresponding actions, please use no access-list policy
action command.
Syntax
access-list policy action policy-name acl-id
no access-list policy action policy-name acl-id
Parameter
policy-name —— The Policy Name, ranging from 1 to 16 characters.
acl-id —— The ID of the ACL to which the above policy is applied.
Command Mode
Global Configuration Mode
Example
Add ACL whose ID is 1200 to policy1 and create an action for them:
T2700G-28TQ(config)#access-list policy action policy1 1200
211