Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
Add the forwarding port 1/0/2 to the static multicast group 225.1.1.2, and it will
receive traffic from all sources:
T2700G-28TQ(config)# interface gigabitEthernet 1/0/2
T2700G-28TQ(config-if) no switchport
T2700G-28TQ(config-if)# ip igmp static-group 225.1.1.2
ip igmp profile
Description
The ip igmp profile command is used to create the configuration profile. To
delete the corresponding profile, please use no ip igmp profile command.
Syntax
ip igmp profile id
no ip igmp profile id
Parameter
id —— Specify the id of the configuration profile, ranging from 1 to 999.
Command Mode
Global Configuration Mode
Example
Create the profile 1:
T2700G-28TQ(config)# ip igmp profile 1
deny
Description
The deny command is used to configure the filtering mode of profile as deny.
Syntax
deny
Command Mode
Profile Configuration Mode
Example
Configure the filtering mode of profile 1 as deny:
321
Advertisement
Table of Contents
