Remove Backup-Image; Remove Config - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
dst_device —— Specify the member's unit in the stack to which the image file
would be saved, in the format of unitid:, for example unit1:. If not specified, the
image file will be saved to all the members in the stack.
dst_imagename —— Specify the name of the image file saved in the destination
switch.
Command Mode
Privileged EXEC Mode
Example
Copy unit 1's image1.bin file to unit 2 as image2.bin:
T2700G-28TQ#

remove backup-image

Description
The remove backup-image command is used to delete the backup-image.
Syntax
remove backup-image [ unitid ]
Parameter
unitid —— Specify the member's unit in the stack from which the backup image
file would be deleted . If not specified, the backup image files of all the switches
in the stack will be deleted.
Command Mode
Privileged EXEC Mode
Example
Delete the backup image files of all the members in the stack:
T2700G-28TQ# remove backup-image

remove config

Description
The remove config command is used to delete the configuration file.
copy image unit1:image1.bin unit2:image2.bin
160