Snmp-Server User - TP-Link T2700G-28TQ Cli Reference Manual

T2700G-28TQ JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
smode —— Security Model, with v1, v2c and v3 options. They represent SNMP
v1, SNMP v2c and SNMP v3.
slev —— The Security Level of SNMP v3 Group. There are three options,
including noAuthNoPriv (no authorization and no encryption), authNoPriv
(authorization and no encryption) and authPriv (authorization and encryption).
By default, the Security Level is noAuthNoPriv. There is no need to configure
this in SNMP v1 Model and SNMP v2c Model.
read —— Read-only view. The management access is restricted to read-only,
and changes cannot be made to the assigned SNMP View.
write —— Write-only view. The management access is writing only and changes
can be made to the assigned SNMP View. The View defined both as the Read
View and the Write View can be read and modified.
notify —— Notify view. The management station software can receive trap
messages of the assigned SNMP view generated by the Switch's SNMP agent.
Command Mode
Global Configuration mode
Example
Add group 1, and configure the Security Model as SNMP v3, the security level
as authNoPriv, the management access to the assigned View viewDefault as
read-write, besides the trap messages sent by View viewDefault can be
received by Management station:
T2700G-28TQ(config)#snmp-server
authNoPriv read viewDefault write viewDefault notify viewDefault
Delete Group group 1:
T2700G-28TQ(config)#no snmp-server group group1 smode v3 slev
authNoPriv

snmp-server user

Description
The snmp-server user command is used to add User. To delete the
corresponding User, please use no snmp-server user command. The User in
group group1
249
smode v3 slev