Dial-Up/Hang-Up Settings - Black Box LRB500A User Manual

Net access broadband router w/4-port switch
Hide thumbs Also See for LRB500A:
Table of Contents

Advertisement

NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
There is no standard ISDN TA initialization string. If your ISDN TA is not
included in the modem list, check your ISDN TA User's Guide for
information for the initialization string for an Asynchronous to
Synchronous PPP connection. If you are using only one channel of your
ISDN connection, you can enter the Async to Sync PPP initialization
string. If you are bundling your connection channels, you'll need to use
a Multilink-PPP initialization string. You must also enter the two phone
numbers in the Telephone Number field of the General Settings dialog
box. Also verify that your ISDN TA supports the dial-up string ATDT.
Most ISDN TAs support ATDT, but some support ATD or ATDI.
6.2.3 D
-U
/H
IAL
P
ANG
The Dial-up/Hang-up settings allow you to specify your connection time (idle
timeout or auto reconnect) and the number of times to attempt to connect (if
connection cannot be established).
1. From the main Manager dialog box, click Port Settings.
2. From the Async tab, click Dial-up/Hang-up Settings.
Individual Port Options
Individual Port Options lets you set the idle-timeout function for each serial port
on the Router. You can set the number of minutes you wish to allow a connection
to stay idle before disconnection.
Default idle timeout for IP Routing is 5 minutes. Default idle timeout for
Remote Access is 30 minutes.
If you un-check the idle-timeout, once a client establishes a connection, the
connection will be maintained until you turn off your modem, unplug your
network device, or use the Terminate Connection function in the Broadband
Monitor program.
The Automatic Reconnect (Always connect) essentially maintains your connection
(for example, idle time out = infinite). If the connection is disconnected for any
reason, it will automatically attempt to reconnect.
Dial-up Retry Options
The Dial-Up Retry option allows you to specify the number of times the Router
should attempt to establish a connection.
68
IMPORTANT
-U
S
P
ETTINGS
NOTE

Advertisement

Table of Contents
loading

Table of Contents