Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
Allow Remote Dial-In
This option allows a remote site to dial-in to this network.
1. From the IP Routing Settings dialog box, select Allow Remote Dial-In.
2. Click Remote Authentication Settings.
3. The Remote Connection Authentication dialog box appears.
Figure 6-4. Remote Connection Authentication dialog box.
4. You must select one of three methods to define the authentication protocol
to be used when a remote site is dialing in to your site. You may select:
• None—No authentication needed.
• PAP—User Name and unencrypted Password are transmitted over the network.
• CHAP—DHCP sends a key which is used to encrypt the user name and
password. Encryption provides added protection from potential interception
of authentication information.
If you select PAP or CHAP, you must indicate where the authentication
process should occur by selecting Use Local Settings, Use Local Client
List, or Use RADIUS Authentication. Refer to Remote Connection
Authentication Settings following this section.
5. Click OK when complete.
54
NOTE
Advertisement
Table of Contents
