Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
After you have selected a device from the Available Devices list, the Status field
provides information about the name, IP address, MAC address, and Firmware
version of your Router.
The buttons in the left column of the screen offer the ability to change the device's
name and password, save and load settings, upgrade the firmware, or run general
diagnostics on the device. The buttons in the right column provide access to
advanced configuration options for General Settings, Port Settings, LAN DHCP
Server Options, Router Settings, and Filter Settings. Additional information about
all of these options is included in this chapter.
If the IP address of the device you are attempting to configure is not
within the same subnet, the "Please Set the Device IP" dialog box
displays, requesting you to input an IP address in the same subnet.
If an error message appears, refer to Chapter 10.
6.1 General Settings
After selecting your device from the Available Devices list, select General Settings
to view or change all of the major network settings for the Router including LAN
and WAN Ethernet segment settings, DNS information, IP Routing, and Remote
Access settings. Most of the settings on these screens were entered in Setup Wizard;
however, some important settings can be entered only in Broadband Manager.
50
NOTE
Advertisement
Table of Contents
