Table of Contents
Advertisement
CHAPTER 5: Telnet
IP Routing
If you will use the async port for IP Routing, enter the following information as
described:
Figure 5-6. IP Routing.
a). Telephone Number
Enter the phone number the async device must dial to connect to the remote
system.
b). User Name
Enter the User Name that will be used for authentication on the remote system.
c). Password
Enter the Password associated with the User Name for the remote system.
d). Idle Timeout
Enter the amount of idle time allowed to pass before the connection times out.
The default value is 5 minutes.
e). Serial Baud rate
Use the list to select the appropriate baud rate of the modem attached to your
43
Advertisement
Table of Contents
