Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
7.10 Status Tab
The Status tab provides information about the status of the WAN Ethernet and
Async ports.
1. From the Broadband Monitor dialog box, click the Status tab.
2. The Status tab information appears.
WAN E
THERNET
This indicator light shows that either the IP Routing or the Remote Access
function is in use.
A
P
SYNC
ORT
Modem Power: The indicator light is lit when the modem power is turned on.
Modem Ready: The Network Device sends a pre-initialization and initialization
command to the modem or ISDN TA. If this communication is successful, the
indicator light will be lit, indicating your modem is ready to make a connection.
Modem Connected: If the Network Device has detected that your modem has
successfully dialed up a connection to a remote site, the indicator light will be lit.
PPP Connected: After a connection is established, if the Router has detected that
the PPP connection is successful, this indicator light will be lit.
3. To Exit Broadband Monitor, close the window.
92
Figure 7-7. Status tab.
Advertisement
Table of Contents
