Table of Contents
Advertisement
CHAPTER 5: Telnet
address to be assigned to the remote system.
Remote Access
Remote Access: To configure the async port for Remote Access, enter values for
each of the following fields:
Figure 5-7. Remote Access Port settings.
a). IP Assigned Method
Select the method the client will use to have their IP address assigned.
b). Protocols
Default value is Both IP and IPX enabled. You may select to use only one protocol;
however, if you are connecting to a NetWare server, you must have IPX™ enabled.
c). IPX/SPX Frame Type
The default value is Autodetect. If you have problems with your network
connection, you may select Ethernet_II, Ethernet_802.3, Ethernet 802.2, or
Ethernet_snap.
d). Authentication Method
Select either None, PAP, or CHAP. Refer to Chapter 6 for additional information.
e). Edit User Database
To add users to the database, select the next available letter. Enter the User Name,
Password, and Callback type for each user that you add to the database. You may
45
Advertisement
Table of Contents
