Table of Contents
Advertisement
Variable Callback: This option allows the remote client to specify the phone
number the Router should call each time a dial-up connection is established.
Assign a specific IP for this user: Select this option if you would like to have a
specific IP address assigned to this user. Enter the IP address in the field provided.
This IP address will be used each time the client logs in and will override the
Assign Remote Site an IP Address option as shown in the IP Router Setting dialog
box, Async tab.
Click Add to complete adding this client to the Local Client List.
Use Radius Authentication
Choosing RADIUS Authentication allows you to use the user information (user
name, password, IP address, etc.) stored on a separate RADIUS server on the
network.
A RADIUS Server (Remote Authentication Dial-In Service) is an
accounting and authentication system used by many large companies
and Internet Service Providers (ISPs). After a client dials in to the
network and enters their username and password, the information is
passed to a RADIUS server. The RADIUS server checks that the
information is correct, and then allows access to the system.
1. From the Remote Access Settings dialog box, in the Remote Users
Authentication section, click Use RADIUS Authentication, then click RADIUS
Setup.
2. The RADIUS Configuration dialog box appears.
Figure 6-6. RADIUS Configuration dialog box.
CHAPTER 6: Broadband Manager
NOTE
57
Advertisement
Table of Contents
