Table of Contents
Advertisement
Table 2-2. Back panel connectors/buttons.
Connector/Button
Power 5VDC
10 BT WAN
ASYNC
Reset
10/100 BT LAN
Uplink/Normal
Description
The 5-VDC power socket is used to connect the
device to the AC power adapter.
The WAN port is used to connect the router to a
DSL or cable modem.
The serial async port connects the router to a
standard modem (optional).
The reset button is used to reset the router to
factory defaults.
The four 10/100 ports are used to connect the
router to LAN client workstations. If the Router is
set to use the Uplink feature, the number 1 LAN
port is inactive as a LAN port.
Slide the switch to the Uplink position to use the
number 1 LAN 10/100 port to expand your
network by connecting a network cable to
another router, switch, or hub. To connect the
number 1 port to a LAN client workstation, slide
the switch to the Normal position.
CHAPTER 2: Introduction
13
Advertisement
Table of Contents
