Table of Contents
Advertisement
If the retry count is 0, the device will not dial-out to connect to the remote site.
Automatic Reconnect will override the Retry count setting if retry count
is set to 0.
6.3 LAN DHCP Server
Refer to the Glossary in Appendix B for more information about the
DHCP function.
1. From the main Manager dialog box, click LAN DHCP Server.
The LAN DHCP Server option indicates if DHCP is Enabled or Disabled.
By default the DHCP function is Enabled. To Disable the function, you
must open the DHCP Configuration dialog box, select Disabled and click
OK.
2. The DHCP Configuration dialog box appears.
Figure 6-11. DHCP Configuration dialog box.
CHAPTER 6: Broadband Manager
NOTE
NOTE
NOTE
69
Advertisement
Table of Contents
