Table of Contents
Advertisement
9. The Asynchronous port function dialog box appears. Select 1) Remote
Access, 2) IP Routing (NAT Enabled), or 3) IP Routing (NAT Disabled).
• Select Remote Access to allow remote users to dial-in to the network to access
resources as if the remote user is connected to the network locally.
• Select IP Routing (NAT Enabled) to allow all users in the two IP segments
(LAN and WAN Ethernet) to share one IP address to the Internet. You may
also select this option to use the serial async port for dial backup in the event
the DSL or cable modem becomes unavailable.
• Select IP Routing (NAT Disabled) to connect other IP segments through the
serial async port.
The IP Routing (NAT Enabled) feature of the serial async port is valid
only if the WAN port is configured as NAT Disabled.
Click Next>>.
CHAPTER 4: Software Installation and Configuration
Figure 4-6. Asynchronous port function.
NOTE
27
Advertisement
Table of Contents
