Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
6. The Setup Wizard: Device IP Address dialog box appears.
Figure 4-3. Setup Wizard: Device IP Address dialog box.
• Enter your local internal network's IP address for this device.
The Setup Wizard will automatically detect the first three octets of your local
IP address. You must enter the last octet only.
• If you wish, you can change the network name of your Router. If your ISP
requires your device to have a name, you may use the value entered in this
field.
• Click Next>> to continue. The device will search the network to ensure that
the IP address is valid. This may take several seconds.
If your ISP provided you with an IP address, do not enter that address in
this field. Enter the IP address for this device on your local network.
Refer to Appendix B for additional information on IP addressing.
24
NOTE
Advertisement
Table of Contents
