Table of Contents
Advertisement
f). WAN E
THERNET
Define the function of the WAN port by selecting Internet Access (IP Routing -
NAT Enabled) or LAN-to-LAN access (IP Routing - NAT Disabled). Refer to
Section 6.1.2 for more information.
a). Internet Access
If you use the WAN port for Internet Access, you must configure the following
options:
Enter the IP port information provided by your ISP or other external network
administrator.
If your ISP uses dynamic IP addressing, leave the External Port IP
address and External Gateway IP address at the default values of
0.0.0.0. Set the External IP Netmask to the default value of 255.255.255.0.
S
ETTINGS
Figure 5-3. Selecting Internet access.
Figure 5-4. WAN Port options.
NOTE
CHAPTER 5: Telnet
41
Advertisement
Table of Contents
