11. The Setup Wizard: Modem Settings dialog box appears.
Figure 4-11. Setup Wizard: Modem Settings dialog box.
The final step in configuring your Router for basic operations is to define your
modem Manufacturer, Model, and the DTE baud rate or speed of communication
between the Router's serial async port and your modem or ISDN TA.
Select your modem and baud rate as described on the following pages.
If you do not have a device attached to the serial async port, use the
default modem values and click Next>>.
12. To select your modem, in the Asynchronous port settings box
click
.
The system loads modem information.
CHAPTER 4: Software Installation and Configuration
NOTE
33