Black Box LRB500A User Manual page 50

CHAPTER 5:Telnet
h). R DNS IP A
OUTER DDRESS
Enter the IP address of your Internet Service Provider's DNS server.
i). DHCP S
ERVER
You may select Disable or Enable. If you would like the Router DHCP server
function to provide IP information to workstations as they connect to the network,
select Enable. When you enable DHCP, you will be prompted to provide the
beginning and ending IP addresses in the range of addresses administered by your
Router. Refer to Section 6.3 for additional information.
j). V S
IRTUAL ERVER
Select Disable or Enable. If you select Enable, you may enter the external and
internal IP Addresses necessary to allow remote clients to access specific devices on
your network via the Internet. Refer to Chapter 6 for more information about
enabling IP Mapping.
k). R T
OUTING ABLE
The Routing Table option lets you create a routing table so your Router will route
IP packets to the proper network. For more information, refer to Section 6.4.
l). C F S
LIENT ILTER ETTINGS
The Filter Settings option allows you to define which packets are allowed to either
pass through, or be blocked from passing through the Router ports. You may filter
packets for network services including Mail, WWW, FTP, Telnet, and News. See
Section 6.5 for more information about filtering options.
m). L D S
OAD EFAULT ETTINGS
Use this option to return the router to the factory-default settings.
n). S R S
AVE AND ESTART ERVER
This option saves your Router configuration into Flash memory and restarts the
device to enable the settings to take effect. The system will pause while settings are
being saved.
47