Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
3. Enter each computer's IP Address and associated User Name in the provided
fields.
4. Click Add after each IP address and name have been added to the list.
5. When all addresses have been added, click OK.
7.7 Event Messages
Event Messages are displayed in the lower half of the Broadband Monitor display.
Event Messages provide information about the communication occurring between
your network device, ISDN TA/modem, and the remote server (ISP).
To assist you in troubleshooting, you may point and click on any event message to
bring up a help screen.
7.8 TCP/IP Tab
The TCP/IP tab displays all TCP/IP requests made by your network device. You
may select to view TCP/IP sessions for the WAN Ethernet or the Async Port.
1. The TCP/IP tab is the default tab displayed in the Broadband Monitor dialog
box. If it is not displayed, click the TCP/IP tab.
The TCP/IP session displays the history of the TCP/IP session through
the selected port. The TCP/IP information presented does not represent
the current status of the TCP/IP session.
The TCP/IP tab displays the following information:
Date/Time:
Port:
Type:
Local IP:
Remote IP:
Port Number: Indicates which TCP/IP port was requested.
2. To Exit Broadband Monitor, close the window.
90
Indicates the date the request was made.
Indicates the port you are viewing.
Displays the type of request being made.
Indicates which IP address you have requested information from.
Indicates which IP address was requested.
NOTE
Advertisement
Table of Contents
