Table of Contents
Advertisement
NET ACCESS BROADBAND ROUTER W/4-PORT SWITCH USERS' MANUAL
5. Enter the port number for the service that you will be using for this IP
mapping. Click Insert to include the mapping.
6. Click OK when you have completed mapping addresses.
IP Mapping function allows you to have only one port service on your
LAN. For example, if you map an external IP (16.895.1.3) to an internal IP
address (192.168.2.22—a www server), only the internal IP address in
your local network can serve as the www.server for the external IP
address.
6.2 Port Settings
The Modem Settings options are used to configure the communication between
your modem or ISDN TA and your Router serial port. You must specify the baud
rate, modem, and modem string settings for your device.
1. To view or change the port settings, from the main Manager dialog box, click
Port Settings. The Port Settings dialog box appears.
62
NOTE
Figure 6-9. Port Settings.
Advertisement
Table of Contents
