Table of Contents
Advertisement
7. The Select Function dialog box appears.
Select the function of the WAN Ethernet port by choosing IP Routing (NAT
Enabled) or IP Routing (NAT Disabled). If you are using NAT Enabled, you
may also select Enable PPPoE .
• Select IP Routing (NAT Enabled) to allow local LAN clients to share one
external IP address for accessing the Internet. This option is most often used
when the Router is connected to a DSL or cable modem, or when the IP
segment of the server needs firewall protection.
• Select IP Routing (NAT Disabled) to allow the Router to function as a router
between IP segments. This option is ideal for organizations that need to
segment workgroups.
• Select Enable PPPoE to use the Router with a time-base, rather than fixed-cost
DSL modem connection. Enter the User Name and Password provided by your
ISP. This option is most often used when connecting via DSL to the Internet.
Enable PPPoE is valid only when IP Routing (NAT Enabled) is selected.
Click Next>>.
CHAPTER 4: Software Installation and Configuration
Figure 4-4. Select Function dialog box.
NOTE
25
Advertisement
Table of Contents
