Internal Memory - Sony PDW-510 Operation Manual

To transfer a title prefix list to the unit's

internal memory

Proceed as follows.
1
Copy the title prefix file (TITLES.TXT) to the
following folder on the "Memory Stick".
\\MSSONY\PRO\XDCAM\GENERAL\VAL_LIST
Note
This folder is created when you insert a "Memory
Stick" into the camcorder. Do not create this folder
yourself on a computer.
2
Insert a "Memory Stick" with the title prefix file
(TITLES.TXT) into the "Memory Stick" slot of the
camcorder.
3
On the CLIP TITLE page of the OPERATION menu
(see page 63), select "LOAD PREFIX DATA" and
then press the MENU knob.
"MEMORY STICK ACCESS" appears, and the file
on the "Memory Stick" (TITLES.TXT) is transferred
to the internal memory of the unit.
The message "COMPLETE!" appears when the
transfer finishes.
Note
The message "FILE NOT FOUND!" appears if no list
of title prefixes is found.
Check the location where the file is stored on the
"Memory Stick".
To select a prefix from the title prefix list
Proceed as follows.
1
On the CLIP TITLE page of the OPERATION menu
(see page 63), select "SELECT PREFIX" and then
press the MENU knob.
A list of up to 20 title prefixes appears.
P00 TITLE PREFIX
001: Tennis
002: Basketball
003: Skiing_1
004: Skiing_2
005: Athletics
006: Aquatics
007: Cycling
008: Softball
009: Fencing
010: Sailing
Note
When no list of title prefixes has been transferred to
the internal memory of this unit, only the initial value
"TITLE" appears.
2
To enter a title prefix directly
Proceed as follows.
1
2
3
4
5
To set the initial value of the clip title serial
number
You can set the initial value of the clip title serial number
to 00001 (default) or to any 5-digit value.
ESC
To return the initial value to 00001
Proceed as follows.
1
2
Select the desired title prefix from the list, and then
press the MENU knob.
The CLIP TITLE page appears again, and the selected
prefix appears in the PREFIX field.
On the CLIP TITLE page of the OPERATION menu
(see page 63), select "PREFIX" and then press the
MENU knob.
A prefix string appears.
23 CLIP TITLE
TITLE
SELECT PREFIX
CLEAR NUMERIC
LOAD PREFIX DATA:
PREFIX : TITLE
!#$%&'()+,-.0123456789;
=@ABCDEFGHIJKLMNOPQRSTUV
WXYZ[]^_abcdefghijklmnop
qrstuvwxyz{}~
INS DEL RET
Move the x mark to the character you want to change
and then press the MENU knob.
Rotate the MENU knob to move the x mark to the
desired character in the list of selectable characters,
and then press the MENU knob.
Repeat steps 2 and 3 to enter the remaining characters.
When you have finished entering the prefix, rotate the
MENU knob to move the x mark to "END", and then
press the MENU knob.
The camcorder exits prefix input mode, and the
original CLIP TITLE page appears.
On the CLIP TITLE page of the OPERATION menu
(see page 63), select "CLEAR NUMERIC" and then
press the MENU knob.
The message "CLEAR OK? bYES NO" appears.
Select YES and then press the MENU knob.
The value in the NUMERIC field returns to 00001.
TOP
: ENABL
: EXEC
: EXEC
EXEC
ESC END
63
3-2 Recording