Using The Pdz-1 Proxy Browsing Software; System Requirements - Sony PDW-510 Operation Manual

The time code shown in this screen is the current initial
time code of the current clip list. If you have already
set the initial time code for this clip list, that time code
is displayed.
4
Turn the SEL/SET dial or the MENU knob to select
the item (HOUR, MIN, SEC, or FRAME) which you
want to set, then press the dial/knob.
5
Turn the SEL/SET dial or the Menu knob until the
desired value is displayed, then press the dial/knob.
6
After all items have been set, select OK, and press the
SEL/SET dial or the MENU knob.
The starting time code of the current clip list is set to
the specified LTC value. The count starts from that
value when playback starts.
To check the time code after setting it
Press the SUB CLIP button and the THUMBNAIL
button, turning their indicators on, and then rotate the
SEL/SET dial or the MENU knob to select the first sub
clip.
The initial time code of the current clip list appears in
the color LCD and the monochrome LCD.
7
Save the current clip list to disc.
See 4-2-6 "Saving the Current Clip List to Disc" (page
82).
8
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
4-4 Using the PDZ-1 Proxy
Browsing Software
When a computer with the PDZ-1 Proxy Browsing
Software installed is connected to this unit, you can
transfer the proxy AV data and metadata files recorded on
a disc to the computer. On the computer side, PDZ-1
enables you to browse the proxy AV data, add or modify
metadata (titles, comments, essence marks, etc.), or create
a clip list.
The modified metadata and the created clip list can then be
written back to the disc loaded in this unit.

System requirements

The following are required to use PDZ-1.
• Computer:
- When using the live logging function:
PC with Intel Pentium 4 CPU, at least 2 GHz (installed
memory: at least 512 MB)
- When not using the live logging function:
PC with Intel Pentium III CPU, at least 1 GHz
(installed memory: at least 512 MB)
• Operating system: Microsoft Windows 2000 Service
Pack 4 or higher, or Microsoft Windows XP
Professional Service Pack 1 or higher
• Web browser: Internet Explorer 6.0 Service Pack 1 or
higher
• DirectX: DirectX 8.1b or higher
To install the PDZ-1
Insert the supplied CD-ROM in the CD-ROM drive of the
computer and execute the Setup.exe file, then follow the
installation instructions.
For details, refer to the ReadMe file in the CD-ROM.
Notes
• Make sure that the hard disk drive on which the work
folder to store the material transferred from this unit has
adequate free space. The amount of proxy AV data
transferred is about 1.4 GB per disc (when recording in
the DVCAM format).
• To transfer files between the computer and this unit
requires this unit's IP address and other network-related
settings to be made.
For details, see 7-3-11 "Making Network Settings" (page
144).

4-4 Using the PDZ-1 Proxy Browsing Software

85