Download  Print this page

Deleting Clip Lists From A Disc; Clearing The Current Clip List From The Unit Memory; Setting The Start Time Code Of The Current Clip List - Sony PDW-510 Operation Manual

Hide thumbs

Advertisement

• Unless the current clip list has been saved to disc, its
contents will be lost when you load a new clip list from
the disc.
4-3-2 Deleting Clip Lists From a
Disc
Proceed as follows.
1
Display the CLIP menu.
See "Displaying the CLIP menu" (page 83).
2
Select DELETE in the CLIP menu, and press the SEL/
SET dial or the MENU knob.
A list of clip lists appears.
The date of creation or the title is displayed for each
clip list. The date of creation is always displayed for
clip lists without titles.
To switch between title display and data of creation
display
Hold down the SHIFT button and press the SEL/SET
dial or the MENU button.
3
Select the name of the clip list to delete and press the
SEL/SET dial or the MENU knob.
The message "DELETE OK? YES b NO" appears.
4
Turn the SEL/SET dial or the MENU knob to move the
b mark to "YES" and press the dial/knob.
The selected clip list is deleted from the disc.
5
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
4-3-3 Clearing the Current Clip List
From the Unit Memory
Proceed as follows to clear the current clip list, leaving it
with no clip list loaded.
1
Display the CLIP menu.
See "Displaying the CLIP menu" (page 83).
2
Select CLEAR in the CLIP menu, and press the SEL/
SET dial or the MENU knob.
The following screen display appears.
84
4-3 Managing Clip Lists (CLIP Menu)
CLIP LIST CLEAR
CLEAR CLIP LIST :
3
Press the SEL/SET dial or the Menu knob.
The message "EXECUTE OK? YES b NO" appears.
4
Turn the SEL/SET dial or the MENU knob to move the
b mark to "YES" and press the dial/knob.
The current clip list is cleared, leaving it with no clip
list loaded.
5
Hold down the SHIFT button and press the SUB CLIP
button.
CLIP menu operations end.
4-3-4 Setting the Start Time Code of
the Current Clip List
The start time code (LTC) of the current clip list is set to
00:00:00:00 when the camcorder is powered on and when
a disc is inserted.
You can set the start time code to any value. Proceed as
follows.
1
Load an existing clip list for which you want to set the
initial time code into to the unit memory as the current
clip list.
For details, see 4-3-1 "Loading a Clip List From Disc
Into Unit Memory" (page 83).
2
Display the CLIP menu.
See "Displaying the CLIP menu" (page 83).
3
Select TC PRESET in the CLIP menu, and press the
SEL/SET dial or the MENU knob.
The following screen display appears.
CLIP LIST TC PRS
HOUR
MIN
SEC
FRAME
OK
ESC
EXEC
ESC
:
00
:
00
:
00
:
00

Advertisement

Table of Contents

   Related Manuals for Sony PDW-510

This manual is also suitable for:

Pdw-510pPdw-530pPdw-530

Comments to this Manuals

Symbols: 0
Latest comments: