For details about the items in the reference file, refer to the
On the SCENE FILE page (see page 154), turn the MENU
knob to move the b mark to "STANDARD", and press the
F04 SCENE FILE
The s displayed on the left of STANDARD changes to x.
When x changes to s, the settings of the camcorder are
reset to the settings saved in the reference file.
If you press the MENU knob again while x is displayed,
the operation is cancelled and the camcorder returns to the
settings before STANDARD was selected.
8-3 Jumping to a File-Related Menu Page When Inserting a "Memory Stick"
8-3 Jumping to a File-
Related Menu Page
When Inserting a
A "Memory Stick" enables you to save user files, scene
files, lens files, reference files and "ALL" files. The
camcorder menu system allows you to make a setting so
that when a "Memory Stick" holding these files is inserted
while in menu operating mode, a menu page relating to the
desired file is automatically displayed on the screen. Thus
you can proceed to file operation quickly. This is very
convenient especially when you manage data files using
To make this setting, proceed as follows.
In the TOP menu, select the FILE menu.
Turn the MENU knob until the MEMORY STICK
page of the FILE menu appears, then press the MENU
knob to select the page. Alternatively, on the
CONTENTS page select MEMORY STICK to display
the MEMORY STICK page.
09 MEMORY STICK
MS IN > JUMP TO :
Turn the MENU knob to move the b mark to "MS IN
> JUMP TO", and press the MENU knob.
The b mark on the left of "MS IN > JUMP TO"
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
Turn the MENU knob to select the desired setting
(target FILE menu page).
Disables this function.
Jumps to the USER FILE page.
Jumps to the ALL FILE page.
Jumps to the SCENE FILE page.
Jumps to the LENS FILE 1 page.
Jumps to the REFERENCE page.