Recording Shot Data Superimposed On; The Color Bars - Sony PDW-510 Operation Manual

3
Turn the MENU knob to move the b mark to the item
you want to set, and press the MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to change the setting, and press
the MENU knob.
The z mark changes to a b mark and the ? mark
changes to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
The menu disappears from the screen, and the display
indicating the current status of the camcorder appears
along the top and bottom of the screen.
7-2-6 Recording Shot Data
Superimposed on the Color
Bars
In the SHOT DISP page of the USER menu, you can select
which shot data is recorded superimposed on the color
bars. You can also select which of the shot IDs (1 to 4) set
in the SHOT DATA page is recorded superimposed on the
picture.
Proceed as follows.
MENU knob
Selecting the shot data for superimposed recording
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the screen.
2
Turn the MENU knob until the SHOT DISP page
appears, and press the MENU knob to select the page.
CANCEL/PRST /
ESCAPE switch
MENU ON/OFF switch
U12 SHOT DISP
SHOT DATE
SHOT TIME
SHOT MODEL NAME :
SHOT SERIAL NO
SHOT ID SEL
SHOT 16:9 ID
SHOT BLINK CHARA:
You can set the following items on the SHOT DISP
page.
Item Description
SHOT DATE Selects whether or not the shot data is
superimposed (ON or OFF).
SHOT TIME Selects whether or not shot time is
superimposed (ON or OFF).
SHOT MODEL Selects whether or not the model name
NAME is superimposed (ON or OFF).
SHOT SERIAL Selects whether or not the serial
NO. number is superimposed (ON or OFF).
Selects whether or not the shot ID set
SHOT ID SEL
on the SHOT ID
superimposed (1 to 4 or OFF).
SHOT 16:9 ID Selects whether or not the 16:9 mode
indicator is superimposed (ON or OFF).
SHOT BLINK Selects whether or not the blinking * is
CHARA superimposed (ON or OFF).
1) To carry out superimposed recording, select the SHOT ID number (1 to 4).
Not to carry out superimposed recording, select "OFF".
3
Turn the MENU knob to move the b mark to the item
you want to set, and press MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
4
Turn the MENU knob to select whether or not to
record the selected item superimposed on the color
bars, and press the MENU knob.
The z mark on changes to a b mark and the ? mark
changes to a z mark.
5
To continue setting other items, repeat steps 3 and 4.
6
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
To carry out superimposed recording
To actually record the items selected for superimposed
recording on the SHOT DISP page, set the OUTPUT/DCC
switch to BARS, DCC OFF.
7-2 Status Display on the Viewfinder Screen
: OFF
: OFF
OFF
: OFF
: OFF
: OFF
OFF
1)
page is
129