Chapter 9 Setting Up The Camcorder; Power Supply; Using A Battery Pack - Sony PDW-510 Operation Manual

9-1 Power Supply

The following power supplies can be used with the
camcorder.
• BP-GL65/GL95/L60S Lithium-ion Battery Pack
• BP-M100 Nickel Metal Hydride Rechargeable Battery
Pack
• AC power using the AC-550/550CE or AC-DN10 AC
adaptor

9-1-1 Using a Battery Pack

When a BP-GL95 Battery Pack is used, the camcorder will
operate continuously for about 120 minutes. Before use,
charge the battery pack with a BC-M150 Battery Charger.
It takes about 145 minutes to charge one BP-GL95.
For details, refer to the battery charger operation manual.
When a BP-M100 Battery Pack is used, the camcorder will
operate for about 120 minutes. Before use, charge the
battery pack with a BC-M50 Battery Charger. It takes
about 240 minutes to charge one BP-M100.
For details, refer to the battery charger operation manual.
Note on using the battery pack
A warm battery pack may not be able to be fully recharged.
Setting Up the
Camcorder
Chapter
Attaching the battery pack
1
Press the battery pack against the back of the
camcorder, aligning the line on the side of the battery
pack with the matching line on the camcorder.
Back of camcorder
2
Slide the battery pack down until its "LOCK" arrow
points at the matching line on the camcorder.
9
BP-GL65/
GL95/L60S/
M100
Align these
lines.
"LOCK"
arrow
Matching line on
the camcorder
159
9-1 Power Supply