AUDIO IN CH-1/CH-2 switches
to DC OUT connector
9-5-4 Connecting Line Input Audio
Connect the audio output connector of the audio
equipment that supplies the line input signal to the AUDIO
IN CH1 or CH2 connector.
Set the LINE / AES/EBU / MIC switch for the channel to
which the audio signal source is connected to "LINE".
Selecting the audio inputs to be recorded
• With the XLR connection automatic detection function
being off (the factory default setting): A signal must be
selected for audio recording by setting the AUDIO IN
CH-1 or CH-2 switch to "REAR", depending on which
of the AUDIO IN CH1 and CH2 connectors is used for
connecting the external audio equipment.
• With the XLR connection detection function being on:
When a cable is connected to the AUDIO IN CH1 or
CH2 connector, the input from that connector is
automatically selected for audio recording, regardless of
the setting of the AUDIO IN CH-1 or CH-2 switch.
The XLR connection automatic detection function can be
switched on or off on the AUDIO-1 page of the
MAINTENANCE menu, with the REAR XLR AUTO
LINE / AES/EBU /
AUDIO IN CH-1/CH-2
to AUDIO IN CH1 or
to AUDIO IN
CH1 or CH2
Line input connection
9-5 Audio Input System