Menu List; Operation Menu List - Sony PDW-510 Operation Manual

Menu List

This section briefly explains menus that the camcorder
provides for adjustments and settings using tables.
For the menu organization and the USER menu, see
Chapter 6.

OPERATION Menu List

The following table lists and describes the items in the
OPERATION menu. Some pages of the OPERATION
menu have been registered in the USER menu at the
factory. These pages are indicated by a circle (
USER menu column. The USER MENU CUSTOMIZE
menu allows you to add and delete pages in the USER
menu to suit your requirements.
USER No. Page
menu
a 01 OUTPUT
186
Specifications
) in the
a
Item Settings
LCD BRIGHT <L> (–32 to +31)
LCD BRIGHT <H> (–32 to +31)
LCD COLOR (–32 to +31)
i.LINK MODE AV/C/FAM
1)
PB WIDE ID (IMX) THROU/AUTO
(PDW-530/530P only)
REAR BNC OUT SEL VBS/SDI
(when option board is
connected)
1)
LIVE LOGGING OFF/ON
This manual also explains some adjustments and settings
to be made using the OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu and DIAGNOSIS
menu.
For details of these menus, refer to the Maintenance
Manual.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default
0
0
0
AV/C
THROU
VBS
OFF
Description
See 7-3-2 "Selecting the
Output Signals" on page 134.
When playing back a disc
recorded as MPEG IMX 50/
40/30 Mbps, specifies
whether to add wide picture
information recorded on the
disc to the output signal.
THROU: Output the video
signals of the disc being
played back without
adding wide picture
information.
AUTO: When wide picture
information is detected
on the disc being played
back, add wide picture
information to the output
video signals.
See 7-3-2 "Selecting the
Output Signals" on page 134.
See 3-2-9 "Recording in Live
Logging Mode" on page 64.