Using Umid Data - Sony PDW-510 Operation Manual

Setting the CCD scan mode
The scan mode of the camcorder has been set to the
interlace scan mode at the factory. The FORMAT page of
the OPERATION menu allows you to change the CCD
scan mode to the progressive scan mode or 24P mode
(PDW-510/530 only).
1
Follow the procedures given in steps 1 to 3 described
in 7-3-4 "Specifying an Offset for the Auto White
Balance Setting" on page 136, to display the
FORMAT page of the OPERATION menu.
2
Turn the MENU knob to move the b mark to "SCAN
MODE", and press the MENU knob.
The b mark on the left of "SCAN MODE" changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
19 FORMAT
16:9/4:3 SELECT :
SCAN MODE
UC/J SELECT

7-3-10 Using UMID Data

To perform operations from interviewing to editing
effectively and to detect audio-visual materials easily
when reusing them, metadata that provides additional
information is recorded along with audio-visual data on a
What is a UMID?
The UMID (Unique Material Identifier) is a unique
identifier for audio-visual material defined by the
SMPTE330M-2003 standard.
Universal label
12 bytes
142
7-3 Adjustments and Settings From Menus
16:9
:? I
: UC
Extended UMID (64 bytes)
Basic UMID (32 bytes)
L Inst. No. Material Number
1 3 bytes 16 bytes
3
Turn the MENU knob to display "PsF" or "24P", and
press the MENU knob.
The z mark changes to a b mark and the ? mark
changes to a z mark.
19 FORMAT
16:9/4:3 SELECT :
SCAN MODE
UC/J SELECT
4
To end the menu operation, set the MENU ON/OFF
switch to OFF.
disc. As one of application of metadata, the UMID
(Unique Material Identifier) is internationally
standardized.
The UMID may be used either as the 32-byte Basic UMID
or as the extended UMID, which includes an additional 32
bytes of Source Pack to make a total 64 bytes.
For details, refer to SMPTE 330M.
Source Pack (32 bytes)
Spatial
Time/Date Country
Co-ordinates
8 bytes 12 bytes 4 bytes 4 bytes 4 bytes
16:9
: PsF
: UC
Org User