Download  Print this page

Advertisement

No.
Page
Item
06
AUDIO-1
CA-701 AUDIO IN
AUDIO CH3/4
MODE
REAR XLR AUTO
FRONT MIC REF
REAR MIC REF
MIN ALARM VOL
SP ATT LEVEL
HEADPHONE OUT
07
AUDIO-2
AU DATA LEN (IMX)
(PDW-530/530P
only)
AU REF LEVEL
AU REF OUT
AU CH12 AGC
MODE
AU CH34 AGC
MODE
AU AGC SPEC
AU LIMITER MODE OFF/–6/–9/–12/–15
AU OUT LIMITER
i.LINK AUDIO OUT
Settings
Default
ENABL/DSABL
ENABL
CH1/2/SW
SW
OFF/ON
OFF
–60 dB/–50 dB/
–60 dB
–40 dB
–60 dB/–50 dB/
–60 dB
–40 dB
OFF/SET
OFF
OFF/3/6/9 dB
OFF
STREO/MONO
MONO
16 bit//24 bit
16bit
–20 dB/–18 dB/
–20 dB
–16 dB/–12 dB/
EBUL
0 dB/+4 dB/–3 dB/
0 dB
EBUL
MONO/STREO
MONO
OFF/MONO/
MONO
STREO
–6/–9/–12/–15 dB
–6 dB
OFF
dB
OFF/ON
ON
2CH/4CH
2CH
Description
When a CA-701 camera adaptor is
connected, selects whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
Selects the sources to be recorded to
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
Turns the XLR connection automatic
detection on or off .
Sets the reference level of the front
microphone.
Sets the reference level when the AUDIO IN
CH1 connector is set to MIC.
Volume of the monitor speaker alarm tone
when it is turned all the way down.
OFF: Almost inaudible.
SET: Faintly audible.
Lowers the volume of the monitor speaker.
Has no effect on earphone volume.
Selects whether to make the rear earphone
monaural or stereo.
Sets the bit length of the digital audio
recording.
Sets the reference level (Head Room).
Sets the output reference level.
Selects whether to perform automatic input
level adjustment of analog audio signals to
be recorded on channels 1 and 2
independently for each channel, or in stereo
mode.
Selects whether to perform automatic input
level adjustment of analog audio signals to
be recorded on channels 3 and 4
independently for each channel, or in stereo
mode, or not at all (OFF).
AGC saturation level setting
For manual audio input level adjustment,
selects the limiter saturation level for loud
input signals.
Turns the audio output limiter on or off.
2CH: Output channels 1 and 2 (16 bits, 48
ksps)
4CH: Output channels 1 to 4 (12 bits, 32
ksps)
201
Specifications

Advertisement

Table of Contents

   Related Manuals for Sony PDW-510

This manual is also suitable for:

Pdw-510pPdw-530pPdw-530

Comments to this Manuals

Symbols: 0
Latest comments: