Sony PDW-510 Operation Manual page 206

No. Page
16 GENLOCK
17 ND COMP
(PDW-530/530P
only)
18 AUTO SHADING AUTO BLK
19 DISC
20 NETWORK
1) The setting of this item is overridden by the setting of BEFORE END 3
when TYPE DETECTION in the BATTERY 2 page is set to OTHER.
2) The setting of this item is overridden by the setting of END 3 when TYPE
DETECTION in the BATTERY 2 page is set to OTHER.
3) This is supported from firmware version 1.4.
4) When TYPE DETECTION in the BATTERY 2 page is set to AUTO, any
batteries other than Sony BP-series batteries and Anton Bauer intelligent
battery systems are classified as "Others".
5) Flashes once per second when the battery status is "BEFORE END", and
flashes 4 times per second when the battery status is "END".
206
Specifications
Item Settings
GENLOCK OFF/ON
RETURN VIDEO OFF/ON
GL H PHASE (–60 to +139)
(PDW-510/530)
(–59 to +142)
(PDW-510P/530P)
GL SC PHASE (–99 to +99)
GL SC 0/180 SEL 0/180
ND OFFSET OFF/ON
ADJUST
CLEAR ND —
OFFSET
EXEC
SHADING
RESET BLK SHD EXEC
TEST OUT SELECT ENC/R/G/B
MASTER GAIN –3/0/3/6/9/12/18/
(TMP) 24/30/36/42/48 dB
DELETE LAST CLIP EXEC
DELETE ALL CLIPS EXEC
QUICK FORMAT EXEC
DHCP ENABL/DSABL
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
DEF. GATEWAY xxx.xxx.xxx.xxx
LINK SPEED AUTO/10 Mbps/
100 Mbps
DUPLEX AUTO/FULL/HALF
Default Description
ON Turns genlock on and off.
OFF Turns return video on and off.
0 Genlock H phase setting.
0
0 Genlock subcarrier phase setting
180 Genlock subcarrier phase setting
— Turns on and off the mode which sets ND
(neutral density) filter color compensation
values.
EXEC Clears ND filter color compensation values.
EXEC Execute the auto black shooting function.
EXEC Clears black shooting compensation values.
ENC Selects the signal output to the TEST OUT
connector.
0 dB Temporarily sets the master gain value.
EXEC Delete the last clip.
EXEC Delete all clips on the disc.
EXEC Formats the disc. All the recorded data is
deleted.
DSABL Selects whether to enable automatic
acquisition of the IP address from a DHCP
server.
192.168.1 Sets the IP address.
.10
255.255.2 Sets the subnet mask.
55.0
0.0.0.0 Sets the default gateway.
AUTO Sets the communications speed.
AUTO Sets the duplex mode.