To check the memory symbol and the
As shown below, a memory symbol and a remaining
memory indication appear in the viewfinder while a
memory card is in use.
About the memory symbol
This symbol indicates the following states.
: A usable memory card is loaded.
: An unusable memory card is loaded. Exchange the
memory card, or format it.
If the usable memory card symbol does not appear after
you insert a memory card, power the camcorder off and on,
and then try inserting it again.
The symbol may never appear, no matter how many times
you try, if you were using a memory card other than the
Remaining memory indications
Examples of remaining memory recording time indications
Remaining memory recording time
F - 95
Full to 95 minutes
95 - 90
95 to 90 minutes
90 - 85
90 to 85 minutes
15 - 10
15 to 10 minutes
10 - 5
10 to 5 minutes
5 to 4 minutes
4 to 3 minutes
3 to 2 minutes
2 to 1 minutes
1 to 0 minutes
0 MIN (flashing)
An "INH" remaining memory indication means that the
memory card is record inhibited. If this appears, remove
the memory card, enable recording to the memory card,
and then reinsert it.