Notes On The Internal Memory - Sony HXR-MC2500 Service Manual

Applicable parts:
• VC-1037 BOARD, COMPLETE (SERVICE)
• WF-1004 BOARD, COMPLETE (SERVICE)
Note
After the replacement and repair, the MAC address is changed, and thus the re-setting for connection devices is required.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach
it to the set when returning the set to customer.
2-3-5.

Notes on the Internal Memory

After the board replacement, execute the procedure below first.
• Start the Adjust Manual in the Adjust Station and execute the "Destination data write" on the ADJUST tab.
• Execute the script files below. (Refer to the flowchart in following figure.)
- 14DdmMmcReadTestMINI_v6.vbe
- 14DdmMMCMakePartition_v6.vbe
Unless these script files are executed, the following symptoms may appear. Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory model cannot be repaired.
• The internal memory cannot be formatted.
START
Connect to the PC with a USB cable,
and turn on the power switch.
* by SEUS driver
Select the "USB CONNECT" to establish
the connection
Execute
the "14DdmMmcReadTestMINI_v6.vbe"
(several second later)
Wait until "SetOverallReadMINI OK" display
During the power is turning-on,
pull-out the AC-adapter.
Then connect the AC-adapter Again
(It's running with blue color monitor.)
HXR-MC2500
(10 seconds later)
Reactive the camcorder automatically
Execute
the "14DdmMMCMakePartition_v6.vbe"
(several second later)
Wait until "MakePartition OK" display
Reactive the camcorder automatically
Disconnect the USB cable,
and turn off the power switch.
END
2-4