Download  Print this page

Advertisement

?P00 USER LOAD
DISPLAY MODE
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
4
Turn the MENU knob until the page which contains
the desired file number appears, then press the MENU
knob.
P00 USER LOAD
DISPLAY MODE
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
5
Turn the MENU knob to move the b mark to the
desired file number to be loaded, and press the MENU
knob.
The message "LOAD OK? YES b NO" appears.
P00 USER LOAD
LOAD OK?
DISPLAY MODE
001.USER1
002.USER2
003.NO FILE
004.USER4
005.USER5
6
To carry out the load, move the b mark to "YES" and
press the MENU knob.
To cancel, press the MENU knob leaving the b mark
pointing to "NO".
The access indicator lights.
When the load is completed, the message
"COMPLETE" appears and the access indicator goes
off.
The USER FILE page appears again.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
If data cannot be loaded
If one of the following error messages appears during or
after the load operation, then the data was not loaded.
ESC
:
ALL
JAN/01/04
JAN/15/04
FEB/05/04
FEB/20/04
ESC
:
ALL
JAN/01/04
JAN/15/04
FEB/05/04
FEB/20/04
ESC
YES NO
:
ALL
JAN/01/04
JAN/15/04
FEB/05/04
FEB/20/04
Data load error messages
Error message
Cause
NO MEMORY
No "Memory
STICK (flashing)
Stick" is inserted.
MEMORY STICK
Circuit or
ERROR
"Memory Stick"
(flashing)
fault.
FILE ERROR
The "Memory
(flashing)
Stick" contains
data that cannot
be loaded into this
camcorder.
8-1 Saving and Loading User Files to and from a "Memory Stick"
Action
Insert or reinsert the
"Memory Stick".
Recheck, and
consult your Sony
representative.
Do not try to load
data saved from
another camcorder.
151

Advertisement

Table of Contents

   Related Manuals for Sony PDW-510

This manual is also suitable for:

Pdw-510pPdw-530pPdw-530

Comments to this Manuals

Symbols: 0
Latest comments: