Recording Analog Composite Signals; (With The Cbk-Sc01 Installed) - Sony PDW-510 Operation Manual

MENU knob
1
Holding down the MENU knob, set the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the b mark to
"OPERATION".
3
Press the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page of the OPERATION
menu appears. If the menu has been used before, the
last accessed page appears.
4
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to "SOURCE SEL", and
press the MENU knob.
If a different page is displayed, turn the MENU knob
until the SOURCE SEL page appears, then press the
MENU knob to select the page.
21 SOURCE SEL
REC VIDEO SOURCE:
EXT REC CONTROL :
i.LINK MODE
5
Turn the MENU knob to move the b mark to "REC
VIDEO SOURCE", then press the MENU knob.
MENU ON/OFF switch
TOP
CAM
OFF
: AV/C
21 SOURCE SEL
REC VIDEO SOURCE:
EXT REC CONTROL :
i.LINK MODE
Item Description
CAM Records the pictures being shot by the
camcorder.
EXT Records video signals from the
external equipment connected to the
i.LINK DV IN/OUT or GENLOCK IN
connector.
The b mark on the left of "REC VIDEO SOURCE"
changes to a z mark and the z mark on the left of the
setting changes to a ? mark.
6
Turn the MENU knob to display "EXT".
21 SOURCE SEL
REC VIDEO SOURCE:
EXT REC CONTROL :
i.LINK MODE
7
Press the MENU knob.
The z mark changes to a b mark and the ? mark
changes to a z mark.
Notes
• During i.LINK DV stream input, the image on the
viewfinder screen and the color LCD may occasionally
show an overlapped frame or skipped frame, but this
does not affect the recording on the disc.
• During i.LINK DV stream input, the audio within the
DV stream is recorded as the audio input.
• During i.LINK DV stream input, a black picture is
shown on the viewfinder screen and on the color LCD,
and nothing is recorded, if the DV device on the sending
side of the i.LINK DV connection is also in a stream
input state.
3-4-2 Recording Analog Composite
Signals (With the CBK-SC01
Installed)
Installing the CBK-SC01 Composite Input Board in the
camcorder enables you to record analog composite signals
3-4 Recording Video Signals from External Equipment
TOP
CAM
OFF
: AV/C
TOP
EXT
OFF
: AV/C
73