Notes On The Internal Memory - Sony Handycam HDR-CX450 Service Manual

Applicable parts:
• VC-1025 BOARD, COMPLETE (SERVICE)
• WF-1004 BOARD, COMPLETE
Note
After the replacement and repair, the MAC address is changed, and thus the re-setting for connection devices is required.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach
it to the set when returning the set to customer.
2-3-5.

Notes on the Internal Memory

After the board replacement, execute the procedure below first.
• Start the Adjust Manual in the Adjust Station and execute the "Destination data write" on the ADJUST tab.
• Execute the script files below. (Refer to the flowchart in following figure.)
- [][]DdmMmcReadTestMINI_v[].vbe
- [][]DdmMmcMakePartition_v[].vbe
Method of the script file acquiring:
Start the Adjust Manual in the Adjust Station and reference the "INTERNAL MEMORY ADJUSTMENTS" on
the ADJUST tab.
Unless these script files are executed, the following symptoms may appear. Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory cannot be repaired.
• The internal memory cannot be formatted.
START
Connect the unit to the PC with a USB
cable, and turn on the power switch.
* PC is installed SeusEX already,
and it can connect to the SeusEX.
Select the "USB CONNECT" to establish
the connection
Execute
the "[][]DdmMmcReadTestMINI_v[].vbe"
(several seconds later)
"SetOverallReadMINI OK" is displayed.
During the power is turning-on,
pull-out the AC-adaptor.
Then connect the AC-adaptor Again.
The process is executed automatically.
(It's running with blue color monitor.)
HDR-CX450/HDR-CX455/HDR-CX485
(10 seconds later)
Reactive the camcorder automatically
Execute
the "[][]DdmMmcMakePartition_v[].vbe"
(several seconds later)
"MakePartition OK" is displayed.
Reactive the camcorder automatically
Disconnect the USB cable,
and turn off the power switch.
END
2-4