Setting The Viewfinder; Recording Shot Data Superimposed On The Color Bars - Sony HDW-650 Operation Manual

(MARKER) on the SUPERIMPOSE page is
set to ON
• When TEST OUT SELECT on the OUTPUT 1
page is set to VBS, and TEST OUT SUPER is
set to ON, and SUPER (MARKER) on the
SUPERIMPOSE page is set to ON
MARKER 2 page
Item Description
USER BOX Turns the display of the box
cursor on and off.
USER BOX Sets the width of the box
WIDTH cursor (distance from center
to left or right edge).
USER BOX Sets the height of the box
HEIGHT cursor (distance from center
to top or bottom edge).
USER BOX H Sets the horizontal position of
POS the center of the box cursor.
USER BOX V Sets the vertical position of
POS the center of the box cursor.
CENTER H Sets the horizontal position of
POS the center marker.
CENTER V Sets the vertical position of
POS the center marker.
ASPECT Turns the display of the aspect
SAFE ZONE safety zone on and off.
ASPECT Selects the range of the aspect
SAFE AREA safety zone (80%/90%/
92.5%/95%).
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.

Setting the viewfinder

You can make settings for viewfinder screen
display functions.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the VF SETTING page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired item, and press the
MENU knob.
Setting the Status Display on the Viewfinder Screen and the LCD Monitor
You can set the following items on the VF
SETTING page.
Item Description
ZEBRA Turns the zebra display on or
a)
off.
ZEBRA Selects ZEBRA 1, ZEBRA 2
SELECT or BOTH.
ZEBRA 1 Adjusts the level of the zebra
DET. LVL 1 (30% to 70% to 107%)
display.
ZEBRA 1 Adjusts the aperture level of
APT. LVL the zebra 1 display. (1% to
10% to 20%)
ZEBRA 2 Adjusts the level of the zebra
DET. LVL 2 (52% to 100% to 109%)
display.
VF DETAIL Adjusts the sharpness of the
LEVEL viewfinder (–99 to 99).
a) When you use the viewfinder which is not
equipped with the ZEBRA switch, turns the
display on or off using this item. When you use
the viewfinder with the ZEBRA switch, the most
recent operation of the ZEBRA switch and this
menu operation is effective.
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Recording shot data
superimposed on the color bars
In the SHOT DISP page of the USER menu, you
can select which shot data is recorded
superimposed on the color bars. You can also
select which of the shot IDs (1 to 4) set in the
SHOT DATA page is recorded superimposed on
the picture.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the SHOT DISP page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired item, and press the
MENU knob.
127